Troubleshooting - Skil JS820301 Guide D'utilisation

TROUBLESHOOTING

Problem
Tool will not start.
The blade binds,
jams, or bums the
wood.
The saw vibrates or
shakes.
20
Cause
1. Battery pack is depleted.
2. Battery pack is not installed
properly.
3. Burned out switch.
1. The blade is dull.
2. An improper blade is being
used.
3. The blade is warped.
1. The blade is damaged.
2. The blade is loose.
Remedy
1. Charge the battery.
2. Confirm battery is locked in place
and secured to the tool.
3. Have the switch replaced by an
Authorized SKIL Service Center or
Service Station.
1. Replace the blade.
2. Choose the right blade for your
operation.
3. Replace the blade.
1. Replace the blade.
2. Remove the blade and reinstall it.