Programmed Playback - AEG CDP 4201 Mode D'emploi

resents the minutes and the second
set the seconds. The fi gure "0" is
entered using the "10" key.
DIGEST (8): When this key is pressed, the player
subdivides the VCD fi le currently
being played into nine parts of equal
size and displays pictures on the
screen at the same time. This may
take a few minutes, depending on
the size of the fi le. With the 1-9
number keys you can change to
the desired section, which is then
animated. Press the key again to
continue from the selected section in
full picture mode.
OSD (9): This displays the CD type, the
functions - e.g. SINGLE REMAIN,
the number of the track and the
remaining playing time of the CD.
Press the key up to fi ve times and
select between the various settings.
RETURN (10): Pressing this key stops CD playback.
The main menu is displayed. This
function can only be used if the CD
that has been inserted is a video 2.0
CD and the PBC mode is activated
(ON) (only in VCD mode).
PBC (11): Switches PBC on and off (only in
VCD mode).
RESUME (12): If the
playback is halted. If the RESUME
key is then pressed, playback
resumes from the position where
playback was interrupted (only in
VCD mode).
SLOW (14): Switches on the slow motion function
during the playback of video CDs.
Each time the SLOW key is pressed,
the speed is changed between 1/2x,
1/4x, 1/8x and
1/16x. To return to normal playback,
press the
mode).
ZOOM (17): In order to enlarge a picture seg-
ment, press the key ZOOM during
playback. The respective picture
can be displayed using the ZOOM
key in two different sizes. With the
I
it is possible to locate the picture
segment more accurately. To return
to normal playback, press the ZOOM
key until the word "RESTORE"
appears (only in VCD mode).
05-CDP 4201 NEU4 ohneCK 55
stop key is pressed, CD
/ II key (only in VCD
I / cursor keys
REPEAT (20): See both tables.
R/L (22): Switches between the loudspeaker
settings: MONO L, MONO R,
STEREO (only in VCD mode).
Playing CDs
1. Open the CD compartment with the OPEN key.
2. Insert a CD with the label facing upwards on to the
central cone until it clicks into place. Then close the
CD compartment.
3. Press the / II Play/Pause key (5) on the device
in order to switch it on. The word "rEAd" appears in
the display. The CD is now played back starting with
the fi rst track. The current song and the time that has
elapsed are shown in the display.
4. In order to remove a CD, press the
the lid of the CD compartment with the OPEN key and
carefully remove the CD. Always keep the lid of the CD
compartment closed.
Note: When a disc is inserted incorrectly, "BAdisc" appears
in the display. If no disc is inserted, the words "NO DISC"
appear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music
in MP3 format. The device also supports all standard CD
types: CD, CD-RW, CD-R. The active ESP function always
appears in the display (memory 100 seconds); see item
"ESP/NP/DIR".

Programmed Playback

This makes it possible to program any order of tracks. See
the "PROGRAM" section in the tables below.
The device stops automatically after all programmed tracks
have been played. If the stop key is pressed once, play-
back is stopped and the program is deleted. It is also deleted
once playback has fi nished or after approximately
10 seconds as soon as the device switches off automatically.
The programmed tracks can also be combined with the
REPEAT function. After you have programmed and started
the device, please press the REPEAT key up to three times
to use the functions described in the "REPEAT" section.
STOP key, open
55
06.09.2005, 9:01:27 Uhr