Programmed Play; Playing Back Music In Mp3 Format - AEG SR 4371 BT Mode D'emploi

English
50
During the playback of an audio CD:
Press once = the current track is repeated continu-
ously. The symbol " " appears on the
display.
Press twice = the whole CD is played continuously.
The symbol " ALL" appears on the
display.
Press three times = All the music tracks are played back in
random order. The notification "RAN"
appears on the display.
Press four times = each track is played for 10 seconds
respectively. The message "INTRO"
appears in the display.
Press five times = all functions are cancelled. The normal
play mode is resumed.
During playback of MP3 music:
Press once = the current track is repeated continuous-
ly. The symbol " " appears on the
display.
Press twice = the selected folder is repeated continu-
ously ( DIR appears in the display).
Press three times = all music titles are repeated continuously
(The symbol " ALL" appears on the
display.).
Press four times = all the music tracks are played back in
random order. The notification "RAN"
appears on the display.
Press five times = each track is played for 10 seconds
respectively. The message "INTRO"
appears in the display.
Press six times = all the functions are deactivated. Play-
back is continued normally.
10/FOLD/M (20)
• Press one of the buttons to skip 10 songs forward or
backwards respectively, provided there are more than
10 songs available.
• Press and hold one of the buttons during MP3 playback.
= next folder, = previous folder.

Programmed Play

This can be used to program any desired sequence of tracks.
(Only in CD-/USB mode)
1. Press the button (12).
2. Press the MEM/PROG./P-MODE button (19). "00 P01"
(Storage space) and the notification "PROG" will appear
in the display. Use the / buttons (8) to select the
desired track and then press the MEM/PROG./P-MODE
button again. The display changes to memory slot P02.
NOTE: For MP3 CDs
• First select a folder using the
buttons (20) (e.g. F01). Then select the song to be
programmed (e.g. T05).
• When switching to another folder, "T01" indicates
the first song of the current folder.
3. Select the next track with the / buttons and press
the MEM/PROG./P-MODE button again. Repeat the
procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "PROG FULL" flashes in
the display.
4. Press the / button (9). The playback starts. The notifi-
cation "PROG" will appear additionally in the display.
5. Press once the button to stop the playback while retain-
ing the program.
6. To play the programme back again, press the
button.
The device stops automatically after all programmed titles
have been played. The listed sequence remains in the mem-
ory until you switch to a different operating mode.
Deleting a programmed sequence
To delete the program, press the button twice. The notifica-
tion "PROG" will disappear.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and
self-recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.
10/FOLD/M
/