Storing The Station Names; Station Memo; Displaying The Station Name - Sony CDX-M610 Mode D'emploi

Storing the station names

— Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name of up to eight
characters for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (MENU), then press M or m
repeatedly until "Name edit" appears.
3
Press (ENTER).
4
Enter the characters.
1 Press M repeatedly to select the
desired characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t )
If you press m repeatedly, the characters
appear in the reverse order.
If you want to put a blank space
between characters, select "
2 Press , after locating the desired
character.
The next character flashes.
If you press <, the previous character
flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to the normal radio reception,
press (ENTER).
18
Tips
• To erase or correct a name, enter " " (under-
bar) for each character.
• There is another way to start storing station
names. Press (LIST) for two seconds instead of
steps 2 and 3. You can also complete the
operation by pressing (LIST) for two seconds
instead of step 5.

Displaying the station name

Press (DSPL) during radio reception.
Each time you press (DSPL), the item
changes as follows:
* If the station name of a station is not stored,
"NO Name" appears in the display for one
second.
Erasing the station name
1
Tune in a station you want to erase.
2
Press (MENU), then press M or m
repeatedly until "Name Del" appears.
3
Press (ENTER).
4
Press M or m to select the station name
you want to erase.
5
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 1 through 4 if you want to
erase other names.
."
6
Press (MENU) twice.
The unit returns to the normal radio
reception mode.
Note
When you erase all of the station names, "NO
Data" appears in step 5.
B Station name* B Frequency