Storing Station Names; Station Memo; Storing The Station Names; Tuning In A Station Through A List - Sony CDX-MP30 Mode D'emploi

Storing station names

— Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name using up to 8
characters for a station.

Storing the station names

1
Tune in a station whose name you want
to store.
2
Press (LIST) for 2 seconds.
Name edit mode
3
Enter the characters.
1 Turn the VOL control dial to select the
desired characters.
(A y B y C y ··· Z y 0 y 1 y 2
y ··· 9 y + y – y * y/ y \ y
> y < y . y _ y A ···)
If you want to put a blank space
between characters, select "_."
2 Press (SEL) after locating the desired
character.
The next character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
4
Press (LIST) for 2 seconds.
Tips
• Simply overwrite or enter "_" to correct or erase
a name.
• If no memory is remaining, "MEM FULL" appears
in the display, and you cannot assign a station
name.
Erasing the station name
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the
band.
3
Press (LIST) for 2 seconds.
4
Press (DSPL) for 2 seconds.
5
Turn the VOL control dial to select the
disc name you want to erase.
6
Press (SEL) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for 2 seconds.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
"NO DATA" appears in step 4.
Tuning in a station
through a list

— List-up

1
During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2
Press (LIST) repeatedly until you find the
desired station.
If no name is assigned to the selected
station, the frequency appears in the
display.
3
Press (SEL) to tune in the desired
station.
17