Displaying And Deleting Measurements - Beurer medical BC 85 Mode D'emploi

The classification on the display and the scale on the unit
show which category the recorded blood pressure values fall
into. If the values of systole and diastole fall into two different
categories (e.g. systole in the 'High normal' category and di-
astole in the 'Normal' category), the graphical classification on
the device always shows the higher category; for the example
given this would be 'High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe hyper- ≥ 180
tension
Setting 2:
moderate hyper- 160 – 179 100 – 109
tension
Setting 1:
mild hyperten- 140 – 159 90 – 99
sion
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

6. Displaying and deleting measurements

User memory
The results of every successful measurement are stored to-
gether with the date and time. The oldest measurement is
overwritten in the event of more than 60 measurements.
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monito-
ring by doctor
regular monito-
ring by doctor
self-monitoring
< 80 self-monitoring
• Select the desired user memory (
memory buttons if the device is switched off.
– To view the measurement data for user
memory , press the M1 memory but-
ton.
– To view the measurement data for
user memory , press the M2 mem-
ory button.
The average of all measurements ap-
pears on the display.
®
If Bluetooth is activated (the symbol will flash on the dis-
play), the blood pressure monitor is attempting to connect
to the app. If you press the M1 button in the meantime, the
transfer will be cancelled and the morning average will be
displayed.
If you press the M2 button, the transfer is cancelled and the
measurement data of user memory
bol is no longer shown. The buttons are deactivated as soon as
a connection is established and the data is transferred.
Press the M1 button if you have selected user memory 1.
Press the M2 memory button if you have selected user
memory 2.
Average values
A flashes on the display.
The average value of all saved meas-
ured values in this user memory is
displayed.
25
) using the M1 or M2
is displayed. The sym-