Preparing For The Measurement - Beurer medical BC 85 Mode D'emploi

Information on the display:
1. Classification of measurements
2. Time and date
3. Systolic pressure
4. Diastolic pressure
5. Cardiac arrhythmia symbol
Pulse symbol
6. Calculated pulse value
7. User memory /
8. Pump up, release air (arrow)
9. Memory space number/memory display
average value ( A ) , morning ( AM ) , evening ( PM )
10. Battery status indicator
®
11. Symbol for Bluetooth
1 2
11
10
9
8
7
PUL
/min
6 5
transfer
SYS
mmHg
3
4
DIA
mmHg

4. Preparing for the measurement

Inserting the batteries
• Remove the battery
compartment lid on the
left side of the device.
• Insert two 1.5 V micro
(alkaline type LR03) bat-
teries. Make sure that the batteries are inserted the correct
way round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery change symbol
no more measurements are possible and you must replace
all batteries.
All display elements are briefly displayed, 24h flashes in the
display. Now set the date and time as described below.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
21
is flashing and E6 appears,