Unit Description; Initial Use; Settings - Beurer GS 80 Mode D'emploi

General notes
• The device is suitable only for self-testing, not for medical or commercial purposes.
• The scale's maximum capacity is 150 kg (330 lb/24 st).
• Check the batteries before submitting a repair query and replace them if necessary.
• Repairs must only be carried out by Customer Services or authorised suppliers.
• If you should have any questions about using our devices, please contact either your retailer or
Customer Services.

3. Unit description

1 Weight display
2 Time
3 Weather forecast
4 Inside temperature
5 Outside temperature
6 Channel
7 Outdoor sensor
Battery compartment
1 MODE button
2 CHANNEL button
3 ALARM button
4 SNZ button
5 button
6 button
7 Reset button

4. Initial use

Remove the batteries from the protective packaging and insert them into the scale and then into the outdoor
sensor within 60 seconds, ensuring that the battery polarity is correct in all cases.
After inserting the batteries, "--.-" appears in the outside temperature LCD fi eld and the radio symbol fl ashes.
The scale now receives the signal from the outside temperature sensor. The transmission is complete when
the outside temperature is displayed.
If the scale does not function, remove the batteries completely and reinsert them. Ensure that the cor-
rect battery polarity is observed. You can also press the "Reset" button. Press the CHANNEL button to
select the fi rst channel (CH1), as the outdoor sensor always searches for the fi rst channel.

5. Settings

Setting the time
In standby mode (time displayed), press the MODE button for 3 seconds. Now use
tween 24- and 12-hour mode. Press the MODE button to confi rm your selection. Now set the time (hours and
minutes) using and , in each case confi rming your entry with the MODE button.
Setting the alarm clock
Press the MODE button in standby mode. "AL" appears in the display (2). Press and hold the MODE button
for 3 seconds. You can now set the desired alarm time using
your entry.
8
2
4
7
6
5
and . Press the MODE button to confi rm
1
3
4
3
7
2
6
1
5
and to choose be-