How The System Works; Key Defi Nitions - Petsafe Stubborn Dog In-Ground Radio Fence Guide D'emploi Et De Dressage

How the System Works

This PetSafe ® In-Ground Radio Fence
works by producing a radio signal from the Fence Transmitter through up to 2800 feet of Boundary Wire. The Boundary
Wire is buried or attached to a fi xed object to enclose the Pet Area. You temporarily defi ne this Pet Area with Boundary
Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and
once trained, is allowed to roam freely in the Pet Area. When your pet reaches the Warning Zone, the Receiver Collar gives a
warning beep and vibrates. If your pet continues into the Static Correction Zone, a safe Static Correction will be delivered
through the Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Fence Transmitter: The device that transmits the radio signal through the Boundary Wire.
Pet Area: The area within the Warning Zone where your pet can roam freely.
Warning Zone: The outer edge of the Pet Area where your pet's Receiver Collar begins to beep and vibrates for 2 seconds,
warning him not to go into the Static Correction Zone.
Static Correction Zone: The zone beyond the Warning Zone where your pet's Receiver Collar will emit a Static
Correction, signaling him to return to the Pet Area.
Boundary Width: The combination of the Warning Zone and the Static Correction Zone.
Receiver Collar: The device that receives the radio signal from the Boundary Wire.
Correction Level Button: The button to adjust the level of Static Correction your pet receives in the Static Correction Zone.
Receiver Indicator Light: The light that indicates the level of correction at which the Receiver Collar is set. This light also
serves as a low battery indicator.
Contact Points: The contacts through which the Receiver Collar delivers the safe Static Correction when your pet moves
into the Static Correction Zone.
Power Jack: The jack where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a
standard 120-volt outlet.
Boundary Control Switch: The switch to adjust according to the length of Boundary Wire used.
Boundary Wire Terminals: The terminals where the Boundary Wires connect to the Fence Transmitter in order to
complete a continuous loop.
Loop Indicator Light: The light that indicates that the Boundary Wire makes a complete loop, enabling the signal to be
transmitted.
Boundary Width C ontrol: The knob that adjusts the width of the Warning and Static Correction Zones. Note: Adjusting the
knob does not change the level of Static Correction on the Receiver Collar.
Fence
Transmitter
Pet Area
Static Correction
Zone
Warning
Zone
4
™ has been proven safe, comfortable, and effective for pets over 8 pounds. The system
Receiver Collar
Static Correction
Zone
Receiver
Indicator Light
Warning
Zone
Washers
Boundary
Width
Contact Points
1-800-732-2677 (US), 1-800-457-3911 (Canada)
Fence Transmitter
Correction
Level
Button
Boundary
Control
Switch
}
Boundary Wire
Terminals
Loop Indicator Light
Power Light
Power
Jack
Boundary Width
Control