Technical Data; How To Use - Hendi 211069 Mode D'emploi

3. TECHNICAL DATA

Hot drinks boiler HENDI – single-walled
Code Dimensions
[mm]
211069 300x300x(H)477
211076 390x390x(H)496
211113 390x390x(H)628
Hot drinks boiler HENDI – double-walled
Code Dimensions
[mm]
211083 300x300x(H)477
211090 390x390x(H)496

4. HOW TO USE

DEVICE INTENDED ONLY FOR HEATING WATER OR WINE.
• Remove all packages before use.
• It is recommended you clean your urn before the
fi rst use.
• Make sure the tap is closed.
• Fill the tank with tap water. Make sure the water
is below the "MAX " water level indicator.
• Replace the lid and turn clockwise to lock into
place (picture 1 and 2).
• Connect the plug and the socket.
• Switch ON. The "HEATING" pilot lamp will light
up and the water starts to heat up. It works in this
Pict. 1. Put the lid on the bowser.
Capacity Time to boil the whole
[l] bowser [min]
10 43 ±5
20 43 ±5
30 55 ±2
Capacity Time to boil the whole
[l] bowser [min]
9 43 ±5
18,5 43 ±5
Power
[W]
1300
2600
2600
Power
[W]
1300
2600
way until the "HEATING" pilot lamp goes out and
the "KEEP WARM" pilot lamp lights up, showing
that the appliance is in the state of preserving
heat.
• Use the faucet to dispense water.
• Always make sure at least three cups of water
are remaining in the tank to prevent the boil-dry
accident (it can lead to burning the heater out).
When about three cups of water are remaining
in the tank, turn the appliance off and unplug it
from the electric outlet.
Pict. 2. Turn clockwise to lock into place.
Tension Weight
[V] [kg]
230 2,34
230 3,6
230 3,94
Tension Weight
[V] [kg]
230 2,72
230 4,3
5
EN