Structure - Hendi 211069 Mode D'emploi

• Switch off the appliance before pulling the plug out of the socket.
• Never carry the appliance by the cord.
• Always use the appliance with the lid ON.
• Never carry the appliance by the lid.
• Do not touch metal parts of the urn as they become hot during use.
• Be mindful of hot steam coming from the lid vents.
• Always put the urn on a clean, level surface that can withstand the weight of the
urn - including water.
• NEVER attempt to move the urn when it is full of hot (or cold) water.
• Do not allow cold water to sit in the urn for more than 2 days as it could stagnate,
which is very unhygienic. Empty the water out completely and refi ll if the urn has
been stood idle over the weekend.
• Your appliance must never be switched on through an external timer or
any kind of separate remote control system.
DO NOT POSITION THE URN SO THAT THE TAP HANGS OVER THE COUNTER EDGE.
IT IS NOT DESIGNED TO BE USED THIS WAY AND COULD LEAD TO SERIOUS SCALDS.

2. STRUCTURE

EN
Cool-touch
lid handle
Cool-touch
lifting handles
Water gauge
Water faucet
– max. height
of glass: 130 mm
Light indicator
of Heating
Light indicator
of Keep Warm
4
Variable
thermostat
ON/OFF switch
with slicone cover