Helios ECgreen Vent KWL EC 800 S Pro WW Notice D'installation Et D'utilisation page 52

Installation and Operating Instructions
EN
CHAPTER 4
CONTROLLER
Overview
The overview shows the status of the unit and the following sensor values:
Current flow rate of both fans and the current temperatures, the status of
the heat exchanger bypass and the pre-heater and auxiliary heater, as well
as the air quality sensor value.
Back
Unit settings
Display brightness
Date and
time
Schedule
Back
Central Ventilation Units KWL EC.. S Pro/WW
4.0 Surface-mounted controller with touch screen
In order to operate the unit, turn the main switch to position I (ON). When the main switch is turned on, the controller
display lights up.
OFF
Unit information
Languages
Overview
Parameters
â ö
Ó
ê
ô
û
Fan settings
Current fan
output
Confirm and
back
Temperature settings
Current actual
Fan
temperature
settings
Temperature
settings
The actual temperature refers to the selected temperature sensor. Can be adj-
usted in service menu 09 – temperature sensor.
14
é
ó
ú
à
Target fan output
Fan Ventilator
200
m 3 /h
Target temperature
Temperature Temperatur
Set fan output
Set tempera-
ture value