EUROM CK2003T Manuel D'utilisation page 12

Description, Composition and Installation
Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance for
damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
This heater can be used as a free-standing unit or may be mounted on the wall. Both options require some specific
preparatory work.
Do not use the heater before it has been installed in accordance with the following instructions!
Free-standing (as a portable heater):
Attach the feet supplied to the underside of the heater (see picture):

Turn the heater upside down. Place a blanket (or something similar) under the heater to prevent damage!

Slide the feet into place on the sides, exactly along the gaps. This will ensure that the threaded holes will align correctly.

Securely attach the feet to the heater using the self-tapping screws.

Return the heater to the upright position.

Make sure a working heater is always placed on a solid, flat and horizontal surface. Deep-pile carpeting is unsuitable!
Mounted (secured to a wall):
Choose a solid, flat and completely vertical wall made of non-flammable and non-melting material on which to mount the
heater (i.e. no wood, synthetic materials, etc!)

Check the materials required to secure the heater to the wall. You should have 2 left hand brackets, 2 right hand
brackets, 4 plugs, 4 long screws and 2 short screws.
1 – air outlet grill heater
2 – handle
3 – thermostat dial
4 – pilot light
5 – mode selector dial
6 – fan switch
7 – base
8 – air intake grill (underside)
12