Before First Use; Changing The Time; Initial Cleaning; Setting The Time - Electrolux EEC5700 Notice D'utilisation

Symbol
4.3 Heat up indicator
If you activate an oven function, the bars
come on in the display. The bars
show that the temperature in the
appliance increases or decreases.

5. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.

5.1 Initial Cleaning

Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.

5.2 Setting the time

After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds
the display shows the software version.
After the software version goes off, the
display shows h and 12:00.
1. Touch
2. Touch
3. Touch
4. Touch
Name
Heat-up / residual heat indi-
cator
Temperature / fast heat up
Temperature
Door lock
Minute minder
or to set the hours.
.
or to set the minutes.
or .
Description
Shows the temperature level in the appli-
ance.
The function operates.
You can examine or change the temper-
ature.
The door lock function operates.
The minute minder function operates.
When the appliance is at the set
temperature, the bars go off the display.
The Temperature / Time display shows the
new time.

5.3 Changing the time

You can change the time of day only when
the appliance is off.
Touch .
flashes in the display.
To set the new time of day, refer to
"Setting the time".
5.4 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure that
the airflow in the room is sufficient.
ENGLISH 9
and the maximum
and the maximum