Installing The App; Pairing The Product With A Mobile Device - SilverCrest SAT90 Guide De Démarrage Rapide

Plug in the revealed USB plug 6 to a USB port.
When the battery is fully charged: Disconnect the product from the USB
port. Reattach the watch strap 7 with the USB plug 6 .
NOTES:
Make sure that the contacts of the USB plug 6 correctly engage with
the contacts in the USB port. If the product does not charge, turn the USB
plug 180° and plug it into the USB port again.
The product turns on automatically as soon as it is connected with the
USB port.
The product cannot be operated during charging.
The charging status is shown at the display's 2 top right.
A charging cycle on approx. 80 mA charging current takes approx.
1.5 hours.
˜ Installing the app
Download and install the
Apple App Store or Google Play Store. Scan the QR code to follow the
direct link:
iOS
˜ Pairing the product with a mobile device
On your mobile device, turn on Bluetooth
SilverCrest Smart Watch
Open the
Settings
tab: Tap
be prompted to pair the product.
NOTE: "English" is set as the standard product language on delivery.
During pairing, the product will detect the language set on your mobile
device and set to it.
SilverCrest Smart Watch
Connect device. Select the model SAT90. You will
app from the
Android
.
®
app.
GB/IE 23