Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution

• The flash cannot be used on camcorders.
• Removing or attaching this unit to a digital still camera while the power
is ON, or disconnecting the connection cord while the power is ON can
cause the flash to fire erroneously.
• When the flash is used in low-temperature conditions, battery
performance is reduced. For example, the number of flashes becomes
lower than that in room temperature (about 20°C), and the charging time
becomes longer. We recommend preparing new batteries. Note,
however, that even batteries whose performance has dropped due to low
temperatures are restored by returning them to room temperature.
• Do not leave or store the flash in temperatures that exceed 40°C. Doing
so might adversely affect the internal structure of video flash.
(In particular, take care not to leave the flash in automobiles during
summer.)
• The nameplate is located on the bottom exterior.

Cleaning

Remove this unit from the digital still camera. Clean the flash with a dry
soft cloth. In case of stubborn stains, use a cloth lightly dampened with a
mild detergent solution, then wipe the unit clean with a dry soft cloth.
Never use strong solvents, such as thinner or benzine, as these damage the
surface finish.
6-GB

Publicité

Table des Matières
loading

Table des Matières