Sony HVL-F32X Mode D'emploi page 12

Mounting the flash (continued)
2
When using the digital still camera which is not compatible
with the advanced accessory shoe
* Connect this unit to the digital still camera with the supplied
connection cord.
Flashing
section
2
1 Turn the rotating knob in the direction of the arrow to loosen.
2 Insert this unit into the accessory shoe towards the front, with the
flashing section facing forward.
3 Turn the rotating knob in the direction of the arrow to tighten.
4 Attach the connection cord to the connection cord terminal of this unit.
5 Connect the connection cord to the ACC terminal of the digital still
camera.
* Depending upon the digital still camera being used, fix the
connection cord by pressing it between the cord clamper.
PNote
Removing or attaching this unit to a digital still camera while the power is ON,
or disconnecting the connection cord while the power is ON can cause the flash
to fire erroneously.
12-GB
1
3
4
5