Sony HVL-F32X Mode D'emploi page 21

2
Press the shutter button on the digital still camera.
PNotes
• A small bounce flash angle causes the light to directly strike the subject
together with the reflected light, resulting in uneven illumination.
• Choose a reflecting surface that is near white having high reflectance. Correct
colouring cannot be obtained with reflecting surfaces other than white. Also,
small reflectance shortens the shooting distance.
Rotating angle of flashing section
The flashing section rotates from 0° in the down direction up to 90° in the
up direction. Use the flashing section at the fixed positions 45°, 60°, 75°
and 90° in the up direction.
90˚
75˚
PNotes
• During photography, do not cover the metering sensor on the flash with your
fingers, for example. You cannot get the proper light intensity.
• When using
You may not be able to get enough light with
or
• Be careful not to pinch your finger when you change the angle of the flashing
section.
60˚
45˚
0˚
Light exposure
,
.
Bounce flash angle
meter
is flashing.
display
. In that case, use
21-GB