Description; Description Of The Appliance; Description Of The Control Panel; Description Of Milk Container And Accessories - V-ZUG CCSXSL60 Mode D'emploi

• Failure to respect these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
Please note: The appliance has a cooling fan.
This comes on whenever coffee, steam or hot water is delivered.
After several minutes, the fan goes off automatically.

DESCRIPTION

Description of the appliance

(page 3 - A)
A1. Cup tray
A2. Service door
A3. Coffee guide
A4. Waste coffee container
A5. Infuser
A6. Cup tray lights
A7. On-Off/stand-by button
A8. Control panel
A9. Tray
A10. Hot water and steam nozzle
A11. IEC connector
A12. Water tank
A13. Coffee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment dial
A18. Pre-ground coffee funnel door
A19. Measure
A20. Measure compartment
A21. Pre-ground coffee funnel
A22. Power cable
A23. Main switch

Description of the control panel

(page 3 - B)
B1. Display: guides the user in using the appliance.
B2. button to select the coffee taste
B3. button to select the type of coffee (espresso, coffee,
long coffee)
B4. / OK button to make one cup of coffee and confirm the
selected function
/ ▽ button to make two cups of coffee and scroll
B5.
backwards through the menu to display the various modes
/ △ button to deliver hot water and scroll forwards
B6.
through the menu to display the various modes
B7. P / ESC button to enable or disable menu parameter setting
mode and exit from the chosen mode
B8. button to make cappuccino
B9. button to make latte macchiato
B10. button to make caffelatte

Description of milk container and accessories

(page 3 - C)
C1. Froth regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout

PRELIMINARY CHECKS

Checking the appliance

After removing the packaging, make sure the product is comple-
te and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.

Installing the appliance

Important!

• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of in-
stallation (see section "Built-in installation").
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
• Never install the appliance in rooms where the temperature
may drop to 0°C or lower.
• Customise the water hardness as soon as possible following
the instructions in the "Setting water hardness" section.

Connecting the appliance

Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified pro-
fessional.
To comply with safety directives, an omnipolar switch with a mi-
nimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
8