Making Latte Macchiato Or Caffelatte; Changing The Quantity Of Coffee And Milk For Latte; Macchiato/Caffelatte; Cleaning - V-ZUG CCSXSL60 Mode D'emploi

CHANgINg THE QUANTITY OF MILK AND COFFEE
FOR CAPPUCCINO
The appliance is set by default to automatically deliver standard
quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk spout.
2. Hold the button (B8) until the message "MILK FOR
CAPPUCCINO PROGRAM QUANTITY" is displayed.
3. Release the button. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button (B8) again.
5. After a few seconds, the appliance starts delivering coffee
into the cup and the message "COFFEE F. CAPPUCCINO
PROGRAM QUANTITY" is displayed.
6. Once the required quantity of coffee has been delivered into
the cup, press the button (B8) again. Coffee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.

MAKINg LATTE MACCHIATO OR CAFFELATTE

• Prepare the appliance as described to make cappuccino.
• Before attaching the milk container to the nozzle, position
the froth regulator between the words CAPPUCCINO and
CAFFELATTE printed on the milk container lid.
If the froth is not satisfactory, move the regulator slightly
until you obtain the required froth.
• Press the button (B9) to request a latte macchiato.
• Press the button (B10) to request a caffelatte and af-
ter a few seconds, frothed milk flows out of the milk spout
into the cup below. (Delivery stops automatically). Milk
delivery stops and the appliance starts delivering coffee.
CHANgINg THE QUANTITY OF COFFEE AND MILK
FOR LATTE MACCHIATO/CAFFELATTE
The appliance is set by default to deliver standard quantities of
coffee or milk.
To change these quantities, proceed as follows:
• Fill the container with milk up to the maximum level indi-
cated on the container.
• Press the button corresponding to the preparation you
want to modify, latte macchiato
(B10) for at least 8 seconds until the appliance displays
"MILK FOR MACCHIATO PROGRAM QUANTITY" or "MILK FOR
CAFFELATTE PROGRAM QUANTITY"
Then release the button.
The appliance starts delivering milk.
• Once the required quantity of milk has been delivered, press
or
(B9) or caffelatte
the button selected previously. Milk delivery stops and the
quantity is memorised.
• After a few seconds, the appliance delivers coffee into the
cup and displays "COFFEE FOR MACCHIATO PROGRAM QUAN-
TITY" or "COFFEE FOR CAFFELATTE PROGRAM QUANTITY".
• Once the required quantity of coffee has been delivered,
press the button selected previously. Coffee delivery stops
and the quantity is memorised.
The appliance is now reprogrammed with the new settings and
the message "COFFEE STANDARD" is displayed.

CLEANINg

Cleaning the machine

Do not use solvents or abrasive detergents to clean the coffee
machine. A soft damp cloth will suffice.
NEVER wash any of the components of the coffee machine in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• coffee grounds container (A4),
• drip tray (A14),
• water tank (A12),
• coffee spouts (A13),
• pre-ground coffee funnel (A21),
• inside of the machine, accessible after opening the service
door (A2),
• infuser (A5).
Cleaning the coffee grounds container
When "EMPTY GROUNDS CONTAINER" is displayed, the grounds
container must be emptied and cleaned.
To clean:
• open the service door on the front of the appliance (fig. 16),
extract the drip tray (fig. 17) and clean.
• Clean the grounds container thoroughly.
Important! When extracting the drip tray, the groun-
ds container must always be emptied.

Cleaning the drip tray

Important! If the drip tray is not emptied the water
might overflow.
This could damage the machine.
The drip tray is fitted with a level indicator (red) showing the
level of water it contains (fig. 28).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (fig. 16).
15
EN