14. Playback using the LINE IN and AUX
connection
Connect an external device as described in section "7.2. Connecting an external de-
vice to the LINE IN or AUX connections" on page 55. Playback is controlled via the
external device.
Press the LINE IN or AUX button on the remote control or press the
the device several times until
15. Settings in the menu
System settings can only be adjusted when the device is switched on.
Any adjustments to the device settings are retained when the device is in
standby mode.
Proceed as follows to navigate in the menu and change the settings:
First select DAB or FM operating mode as described above. Different settings
can be configured depending on the selected operating mode.
Press the MENU button to open the menu.
Press or to select a specific menu or item.
Press the OK button to open a specific menu or to confirm a setting.
You can return to the previous menu by briefly pressing the MENU button
again.
Press and hold MENU to exit the menu completely. The last radio station set ap-
pears in the display.
66
or
LINE IN
AUX
is shown on the display.
button on