Safety Information - Siku 2466 Mode D'emploi

Congratulations
on your purchase of this high-quality model toy. We kindly
ask that you read these instructions carefully before using
this model for the first time. We will give you the necessary
information and tips on the correct handling of the prod-
uct on the following pages.
Keep these instructions in a safe place.
We hope you will enjoy your SIKU product.
Sieper GmbH
Introduction
Important information
After unpacking the conveyor belt, please check whether
there is any transport damage. Please contact your dealer
if you have any complaints.
Please read these instructions carefully before using the
product for the first time. They will give you important in-
formation for your safety and the use and maintenance of
this product. Keep these instructions safe for future refer-
ence or any warranty claims. This model has been de-
signed in accordance with the latest safety requirements
and has been manufactured under constant quality moni-
toring. We incorporate the results of this monitoring into
our development process. For this reason, we reserve the
right to technical and design amendments so that we are
always able to offer our customers optimum product qual-
ity. Nevertheless, should there be reason for complaint
please contact your dealer.

Safety information

This model may only be used for the purpose intended,
i.e. as a toy in dry and enclosed rooms. Any other use
is not allowed and may be dangerous. The manufacturer
cannot be held responsible for any damage caused by
failure to use the product correctly.
Protect the model from dampness!
For safety reasons, the conveyor belt may not be used
near slopes, stairs, roads, railroad tracks, bodies of wa-
ter, fan heaters, puddles, sand pits, etc.
Ensure that the model is not played with until after the
conveyor belt has been checked and put into operation
by an adult.
Only adults are permitted to replace batteries.
The model complies with the prescribed safety legisla-
tion and is TÜV-GS tested. Danger to the user may
arise from improper repairs and structural alterations
(dismantling of original parts, attachment of inadmissible
parts, changes to the electronics, etc.).
Instruct children on how to handle the model correctly
and bring any possible danger to their attention.
Bear in mind that unforeseeable situations may arise
from the natural playful temperament of children for
which the manufacturer cannot be held responsible.
You should supervise the children's play even though
danger to children is essentially ruled out if the model is
used correctly.
Use only dry and dust-free cloths to clean and care for
the model.
Please make sure that the model is not picked up off the
floor for as long as the conveyor belt is still running.
Do not bring fingers, hair and loose clothing near the
conveyor belt when the model is switched on (operating
switch set to "ON").
Only (rechargeable) AAA batteries are permitted to be
used to operate the model.
In order to guarantee the design-related safety level of
this model in the long term, this model should be
checked regularly for any visible damage by an adult.
This model is not suitable for use by persons with im-
paired physical or mental abilities or motor function or
with insufficient experience or knowledge until they
receive instruction from a person who is responsible for
them.
PLEASE NOTE: The conveyor belt is compatible with all
1:32 scale SIKUFarmer models.
Declaration of warranty
Before you start
1. Put operating switch of the model into the "OFF" posi-
tion. (Image )
2. PLEASE NOTE: The (rechargeable) batteries can only
be changed by adults!
PLEASE NOTE: The (rechargeable) batteries (2xAAA)
required to operate the model are not included in the
scope of supply. The model may only be used in dry ar-
eas and protected against dirt – in particular dust and
damp. Use dry cleaning cloths for cleaning and care.
Contacts in the model must not be short-circuited.
3. The battery compartment lid is secured with a slotted
head screw.
4. Use a suitable screwdriver to unscrew the slotted screw
before opening the battery compartment lid carefully.
(Image ).
5. Insert the (rechargeable) AAA batteries into the battery
compartment. Observe the symbols on the placement
and position of the batteries in the battery compart-
ment.
6. Carefully reinsert the battery compartment lid and
tighten the slotted screw using a suitable screwdriver.
PLEASE NOTE: When using rechargeable AAA batteries,
the speed of the conveyor belt may drop as a result of the
lower voltage supplied by these batteries.
If rechargeable batteries are used, we recommend the use
of AA-NiMH batteries (nickel metal hydride). When buying
rechargeable AAA batteries, look out for this marking.
Page 78
7