Reversing The Door Opening Direction; General Description - Brandt UM1000 Guide D'utilisation

REVERSING THE DOOR OPENING DIRECTION

You can reverse the direction of opening of
the door (left instead of right):
The appliance must always be
disconnected when you change the door
opening direction.
1. Remove the top of the fridge: remove the
2 screw covers on the top, remove the 2
screws and slide the top forwards.
2. Slightly tilt the appliance towards the rear
and wedge it in this position.
3. Unscrew the screws from the door upper
hinge and remove the hinge support and
pin.
4. Slightly open the door and extract it from
its lower hinge.
Note:
your freezer may differ slightly from this picture

GENERAL DESCRIPTION

5. Unscrew the lower pin and screw it in
on the opposite side. Insert the door in
the pin and close it.
6. Firmly screw the upper hinge to the
opposite side and the door pin. Fit the
fridge top (carry out point 1 in reverse).
Thermostat
Drawers
.
6