Safety Standards / Recommendations - Brandt UM1000 Guide D'utilisation

SAFETY STANDARDS
This appliance is designed ONLY for domestic conservation of foodstuffs.
Installation must be as instructed in this guide. Incorrect installation could damage the
appliance.
For any operating problems, always and only contact authorised After Sales Service centres,
or qualified personnel.
Before carrying out any maintenance, disconnect the appliance, but not by pulling
on the power supply cable.
If this freezer replaces another, which had a latching, spring-mounted, locking or other
closure system, do not forget to destroy the closure device or better yet remove the door of
your old freezer, so that no-one could become trapped inside (children playing, animals, etc.).
RECOMMENDATIONS
After unpacking the appliance, make sure that it is undamaged. If it is, the reseller should be
notified of any damage within 24 hours of delivery. The packaging materials used are entirely
recyclable (cardboard, PE bubble wrap, EPS, etc.). Keep these materials out of the reach
of children.
For optimum operation of the appliance, install it away from sources of heat and make sure
that air can circulate freely around it (see appliance installation).
The appliance's cooling circuit contains a coolant called isobutane, a relatively clean
natural gas which is nonetheless flammable. During transport and installation of the
appliance, make sure that none of the components of the cooling circuit is damaged. In the
event of damage, keep away from flames and ignition sources, and ventilate the room well.
4