Placing And Installation; Choosing The Right Place; Connection To Power Supply; Adjusting The Height Of The Appliance - Brandt UFA1102E Guide D'utilisation

Placing and Installation

Choosing the Right Place

Place the appliance in dry and well ventilated room. Allowed
ambient temperature depends on the model (class) of the
appliance and is stated on the rating plate of the appliance.
Never place the appliance near heat emitting devices (e.g.
cooker, radiator, water heater and similar devices) and do not
expose it to direct sunlight.
The appliance should be positioned at least 3 cm away from
the electric or gas cooker and at least 30 cm away from the oil
or coal stove. If this is not possible, use an appropriate
insulation.
Class
SN (sub-normal)
N (normal)
ST (sub-tropical)
T (tropical)

Description of the Appliance

Freezing Compartment (1)
is used for freezing fresh foods.
Storing Basket (2)
is used for storing packages of frozen foods.
Ambient temparature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 16°C to + 38°C
from + 16°C to + 43°C
Instructions for Use

Connection to Power Supply

Connect the appliance with the cable and plug to the power
supply socket outlet with a ground terminal (safety socket).
Required nominal voltage and frequency are indicated on the
rating plate.
The connection to the mains supply and earthing have to be
made according to current standards and regulations. The
appliance resists temporary voltage tolerance up to -6 to +6 %.
Your appliance is compliant with European Directives as well
as their modifications.

Adjusting the height of the appliance

The appliance is equipped with four adjustable legs, so that the
height may be adjusted from 82 to 90 cm. The height must be
adjusted prior building the appliance into the opening slot, and
it should be set at such height that the top panel of the
appliance fits exactly below the kitchen worktop (see Mounting
Instructions).
Control Panel (3)
See Operation Controls
11