Eurosystems Minieffe 502 Mode D'emploi page 13

List of contents
Introduction
Conditions of use
Safety measures
Transport
Assembly
Regulating
Maintenance
Technical Details
Noise
Accessories
Serious risk for operator and
bystander safety.
Introduction
Dear Customer:
Thank you for your confidence in purchasing our products. We wish you to enjoy using our machines.
The following working instructions have been issued to ensure you a reliable running from the beginning. If you
carefully follow such information the machine will operate with complete satisfaction have a long service life.
Our machines are tested under the most severe conditions before being put into production and are subjected
to strict continuous tests during manufacturing stages.
The present unit has been tested in the country of origin by independent testing authorities in accordance with
strict work norms and safety standards.
When required, only original spare parts must be used to maintain guaranteed function and safety levels.
The operator forfeits any claims which may arise, if the machine shows to be fitted with components other than
original spare parts.
Subject to changes in design and construction without notice.
For any questions or further information and spare part orders,we need to be informed of the unit serial number
printed on the side of the machine.
IDENTIFICATION DATA (Fig. 1)
n
The tag plate with the machine data and Serial N° is on the left side of the scythe mower under the engine. Note
- Always state your motor cultivator serial number when you need Technical Service or Spare Parts.
CONDITIONS OF USE AND LIMITATIONS OF USE
n
This motor mower is designed and built to mow grass on fodder cropped land. The motor mower must only be
used with original equipment and spares. Any use other than that described above is prohibited and will involve,
in addition to cancellation of the warranty, serious risk for the operator and bystanders.
SAFETY PRECAUTIONS
n
Attention: Before assembly and putting into operation, please read the operating instruction carefully. Persons
not familiar with these instructions should not use the machine.
1. Before you start mowing, the lawn must be cleared of foreign bodies and also during mowing care
must be taken of these foreign bodies.
2. When starting the motor, the person who is handling the machine must not stand in front of the cutter
bar. During the engine switch on the operator should not raise the unit. The unit itself should be put in
the sloped position only when the cutting blade is turned to the opposite side compared to the operatorís
one.
3. When the rotary mower is lifted to be transported, the motor has to be stopped and one has to wait
until the cutting tools come to a standstill. When pushing outside the lawn, the cutting tools are to be
6