Accu-Chek Compact Plus Manuel De L'utilisateur page 42

The procedure for changing the settings is as follows:
The settings have a fixed sequence and are displayed consecutively,
see illustration on the previous page.
Press the S button to call up the settings.
A test strip is not advanced.
Press the M button to change the setting that is currently flashing.
½
Numbers such as the year are incremented by one. Pressing and
holding down the button increments the number quickly.
½
From the highest selectable number, pressing the M button
automatically takes you to the lowest one.
½
In the case of settings where there are a number of options, such
as the beep tone setting, pressing the M button presents each
option in turn.
Press the S button to save the chosen setting and move on to the
next setting.
You can change any setting at any time. Press the S button
repeatedly until the setting you wish to change is displayed flashing.
42
Settings