Beep Tones During Testing; Announcement Of The Result Following A Test - Accu-Chek Compact Plus Manuel De L'utilisateur

6.2

Beep tones during testing

Following the power-on beep and the 1 – 2 – 3 sequence of beeps, you
will hear the following while you test:
a single beep when the meter is ready to test so you can let the test
strip draw up blood or control solution,
a single beep when the test strip has drawn up sufficient blood or
control solution and the test is starting,
several beeps each time the meter displays an error message (see
Chapter 6.5).
6.3

Announcement of the result following a test

In Acoustic Mode, whenever your meter displays a result following a
blood glucose test, it also announces the result as a series of beeps. The
result is not treated as an entity, but is broken down into individual
digits.
Examples:
The result 7.6 mmol/L is announced as 0 – 7 – decimal point – 6.
The result 138 mg/dL is announced as 1 – 3 – 8.
Acoustic Mode
6
123