Introduction; Intended Use; Features; Package Contents - Parkside Performance PASSP 20-Li A2 Traduction Des Instructions D'origine

CORDLESS IMPACT
WRENCH 20V PASSP 20-Li A2

Introduction

Congratulations on the purchase of your new tool.
You have chosen a high-quality product. The oper-
ating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has a clockwise/
anticlockwise rotation, a 1/2" external square
drive bit holder and an LED working light. The light
on this appliance is intended to illuminate the
immediate working area of the appliance. The
rotary impact function of the appliance enables the
power of the motor to be converted into uniform
rotary impacts. The impact mechanism comes into
effect during tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer
accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this appliance only as described and for the
areas of applications specified. The tool is not
intended for commercial use. Any other usage or
modification of the tool is deemed to be improper
and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
2
GB │ IE
■ │

Features

Tool holder
Rotational direction switch/lock
Belt clip
Fixing screw
3a
LED work light
Torque display
Torque selector
ON/OFF switch/speed control
Battery pack*
Release button for the battery pack
High-speed charger*
Battery display LED
Battery charge level button
Red charge control LED
Green charge control LED
Sockets
1/2" to 3/4" adapter

Package contents

1 cordless impact wrench 20V
1 1/2" to 3/4" adapter
3 sockets (17/19/21 mm)
1 belt clip
1 carrying case
1 set of operating instructions
PASSP 20-Li A2