Warranty Conditions - Kospel GRW typ 50 Manuel D'utilisation

Warranty conditions

1. The product carries manufacturer's 24 months warranty starts on the date of
purchase. The warranty covers all defects originating from faulty materials and
workmanship.
2. If a fault of the appliance is noticed the user is obliged to inform about the fact an
importer.
3. The warranty will not cover any call out charges that are a user or external control
fault.
4. It is importer's right to decide whether the broken down unit will be repaired or
replaced.
5. The warranty covers the replacement of any faulty parts and labour costs.
6. Warranty period is automatically extended for a period of time during which the unit
does not work because of its defect.
7. Warranty repairs cannot be performed if the warranty card is not filled. Statutory
rights can claimed if the user holds a proof of a purchase.
8. The warranty does not exclude or limit the buyer's statutory rights come out of
nonconformity of goods with the contract.
Application
The GRW range of immersion heater is intended to heat the water in storage water
heaters and heat exchangers only.
Installation
a. Drain all the water from cylinder
b. Screw out the cork 1½''
c. Fit the immersion heater using the tool
d. Refill cylinder with water
e. Check for leaks in threaded connection.
GRW-1,4/230 type 50; GRW-2,0/230 type 50 , GRW-3,0/230 type 50
- connect the immersion heater to the socket outlet with an earth contact (PE).
GRW-3,0/400 type 50; GRW-4,5/400 type 50; GRW-6,0/400 type 50; GRW-7,5/400
type 50; GRW-9,0/400 type 50
- electrical connection must be done by a licensed electrician.
Manufacturer is not responsible for damages to the immersion heater caused by poor
or incorrect installation work.
PL;DE;FR;GB;RU-068B_f.983
GB
9