Location; Electrical Connection; Warranty And Warning - Gram KPS 90 Mode D'emploi

ENGLISH

Location

The cabinet should be placed in a dry and adequately ventilated room. To ensure
effective operation, do not place it in direct sunlight or near a heat source. The
cabinet is designed to operate in an ambient temperature of up to +40°C. The
adjustment screws on the legs can be used to make sure the cabinet stands level.

Electrical connection

The cabinet is intended for connection to alternating current. The connection values
for voltage (V) and frequency (Hz) are given on the nameplate inside the cabinet:
230V 50Hz

Warranty and warning

Warranty:
The validity of the warranty is conditional on the following minimum requirements
being observed:
1) The refrigerating system may only be repaired by authorised personnel.
2) Electrical and electronic parts may only be inspected/replaced by
authorised personnel.
Warning:
Your blast chiller is designed for chilling/freezing of food and similar items.
The cabinet must not be used to store items that release explosive vapour which
might create the risk of explosion.
At points where a warning triangle is used to indicate that shielding should not be
removed and/or screws are used to secure shields (e.g. around electrical parts,
heating element and moving parts such as fans), the shielding concerned must not
be removed until the power has been disconnected at the plug.
Any service or repair work may only be performed by authorised personnel.
76-504-0926
14