Step 9 - Complete Installation; Range Hood Use - Haier HCH2100ACS Guide De L'utilisateur

STEP 9 - COMPLETE INSTALLATION

1. For non-vented (recirculating) installations only, install charcoal filters over the
blower motor intakes on both the left-hand and right-hand sides of the blower
motor. See the "Range Hood Care" section.
2. Install metal grease filters. See the "Range Hood Care" section.
3. Remove any remaining film from the vent covers.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and odors from the
cooktop area. For best results, start the hood before cooking and allow it to operate
15 minutes after the cooking is complete to clear all smoke and odors from the
kitchen.
a
Duct Cover
b
Control Panel
c
Glass Canopy
d
Lamp Cover
14
d e g f
a
b
e d
e
Halogen Bulb
f
Grease Filter Release
g
Grease Filter
c