EUROM Valencia Manuel D'utilisation page 41

 By pressing the 'dimmer' button (there are 5 positions), you can intensity or
decrease the flame effect of the heater.
 You switch off the heater by pressing the ON/OFF button. The temperature level
that you set will remain. However, if you switch on the heater once again, you
will have to reset the output.
 If you want to switch off the heater for a longer period, then also set the main
switch on O (OFF). The set temperature will now be erased. Finally remove the
plug from the socket.
Timer:
 The heater has a built-in weekly timer, which allows you to set a weekly
schedule for switching on and off. You must first set the date and time; if
you don't do that, then the heater assumes that it is scheduled for Sunday at
00.00!
 Press the ON/OFF button to switch on the heater.
 Press on the DAY/TIME button; the day indicator will light up. Select the
arrows Λ and V for the current day and confirm this by pressing the
DAY/TIME button again (Sunday, Monday, etc.)
 The hour indication will now flash. By pressing on the + and - buttons, you
select the current hour. Reconfirm by pressing on the DAY/TIME button.
 The minutes indicator will now flash. By pressing on the + and - buttons,
you select the precise time. Confirm by pressing on the DAY/TIME button.
 Day and time are now set.
 To set the weekly timer, take the following steps:
 Ensure that the heater is switched on with the ON/OFF button.
 Press on the TIMER SET button. The indication 01 on the display starts to
flash, indicating that you have selected the first timer setting (you can select
10 timer settings). Confirm this by pressing once again on the TIMER SET
button.
 The day indicator will now flash (SUN). Choose the days when the heater
must operate (e.g., from Monday to Friday) by pressing + next to the days
you have selected and pressing - next to the days that you don't want to
select. Use to arrows to move to the next day. Press again on the TIMER
SET button to choose the days and confirm.
 The hours indication will now flash and you will see ON on the display. By
selecting the + and - buttons, you choose the hours when you want the
heater to operate. Confirm by pressing the TIMER SET button.
 The minutes indicator will now flash. By pressing the + and - buttons, you
select the time period (in intervals of 10 minutes) for the heater to operate.
Confirm by pressing on the DAY/TIME button. The starting time is now set.
 The hour indicator is flashing again to order for you to set at which time the
operation must end. OFF appears on the display. Select the time in the same
way you selected the operating time and confirm by using the TIMER SET
button.
 Now the temperature setting starts to flash. Using the + or - buttons, select
the desired temperature and confirm by using the TIMER SET button.
41