Abus TVHD51000 Manuel Utilisateur page 33

COMMUNICATION
COMMUNICATION
CAMERA ID
BAUD RATE
RETURN
Function
CAMERA ID
BAUD RATE
RETURN
ALARM DETECT
When this function is activated, the camera sets a required zoom factor with activated switching
input. Once the set time has elapsed, the starting position is reset automatically. (The zoom factor is
not retained or will not be used again for further active switching input. The switching input must be
deactivated.)
ALARM DETECT
ALARM IN
ZOOM RATIO
DELAY TIME
DEFAULT
RETURN
Function
ALARM IN
ZOOM RATIO
DELAY TIME
DEFAULT
RETURN
1
2400
Description
1~255
Setting for the RS-485 camera ID (ID 0 is reserved for the control
unit)
2.400 / 4.800 / 9.600 / 115.200
Setting for the baud rate of the RS-485 communication interface.
Back to main menu
ON
14X
10 SEC
OFF
Description
ON: Zoom factor is activated with active switching input
OFF: Zoom factor is deactivated with active switching input
Setting for the zoom factor for active switching input
Delay time in which the zoom factor remains set
"ON" resets the settings on this page
Back to main menu
33