Abus TVHD51000 Manuel Utilisateur page 30

NIGHT TO DAY
DELAY TIME
B/W
DEFAULT
RETURN
WHITE BALANCE
Function
MODE
RED GAIN
BLUE GAIN
PUSH AUTO
DEFAULT
RETURN
This value must be set at a higher level than the "NIGHT TO DAY"
value (value is proportional to the amplifier control).
0~151
This value must be set at a lower level than the "DAY TO NIGHT"
value (value is proportional to the amplifier control).
1~60
A delay time can be set between identifying and applying the
required day/night switching (value in seconds)
OFF: Colour saturation is activated permanently.
ON: Colour saturation is deactivated permanently.
Restores all values in the sub-menu to the factory settings
Back to main menu
Description
AWB: White balance calculations are dynamically and
continuously performed in the 1.800~10.500 K range.
ATW: White balance calculations are dynamically and
continuously performed in the 2.700~9.500 K range.
INDOOR: The camera tries to set the white balance for artificial
light.
OUTDOOR: The camera tries to set the white balance for natural
light.
PUSH AUTO: This function performs the white balance once
(after activating the "PUSH AUTO" further down).
MANUAL: Manual setting of the white balance.
0~255
Setting the red value
0~255
Setting the blue value
OFF: White balance is not performed
ON: White balance is performed and saved
Restores all values in the sub-menu to the factory settings
Back to main menu
30