Abus TVHD51000 Manuel Utilisateur page 29

ZOOM END
ZOOM SPEED
DEFAULT
RETURN
CAMERA SETUP
CAMERA SETUP
EXPOSURE
DAY/NIGHT
WHITE BALANCE
EFFECT
RETURN
EXPOSURE
Function
ATR-EX
LEVEL
SHUTTER
BLC
AGC
DNR
DEFAULT
RETURN
DAY / NIGHT
Function
MODE
DI/DO
DAY TO NIGHT
Setting for the start zoom factor
2~18
Setting for the end zoom factor
LOW: Slow zoom speed
MIDDLE: Medium zoom speed
HIGH: Fast zoom speed
Restores all values in the sub-menu to the factory settings
Back to main menu
-
-
-
-
Description
NORMAL: Deactivates the WDR function
ATR-EX: Activates the WDR function
0~4
Level 0 is the lowest. At level 4, dark areas are brightened the
most. The higher the level, the more image noise may occur.
1/50~1/20.000
Fixed setting of exposure time
OFF: Backlight compensation is deactivated
ON: Backlight compensation is activated
-3 dB~28 dB
Setting for the max. amplifier control for poor light conditions
OFF: Noise reduction function is deactivated
1~5: Level 5 is the highest level for noise reduction. The higher
the level, the "softer" or more out of focus the image appears.
Restores all values in the sub-menu to the factory settings
Back to main menu
Description
AUTO: Automatic switchover between day and night mode.
The switching thresholds are defined in the next menu items.
DAY: Day mode is permanently activated.
NIGHT: Night mode is permanently activated.
EXT: The switching input activates the day or night mode.
DI:H
Day mode set for deactivated switching input
DI:L
Night mode set for deactivated switching input
0~151
29