Port - Abus IPCS10020 Manuel Utilisateur

10.3.2.2 Port

If you wish to enable external access to the network encoder, the following ports must be configured.
HTTP Port
The default port for HTTP transmission is 80. This port can alternatively be assigned a value in the range of
1024~65535. If several network encoders are connected in the same subnetwork, each device should be
given a unique HTTP port of its own.
RTSP Port
The default port for RTSP transmission is 554. This port can alternatively be assigned a value in the range of
1024~65535. If several network encoders are connected in the same subnetwork, each device should be
given a unique RTSP port of its own.
HTTPS Port
The standard port for HTTPS transmission is 443.
Server port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. As an alternative, this
port can be assigned a value in the range 1025 ~ 65535. If several devices are connected in the same
subnetwork, each device should be given a unique SDK port of its own.
Apply the settings by clicking "Save".
89