Tcp/Ip - Abus IPCS10020 Manuel Utilisateur

10.3.2.1 TCP/IP

To be able to operate the network encoder via a network, the TCP/IP settings must be configured correctly.
NIC Settings
DHCP
If a DHCP server is available, click DHCP to apply an IP address and other network settings automatically.
The data is transferred automatically from the server and cannot be changed manually.
If no DHCP server is available, please enter the following data manually.
IPv4 Address
Setting of the IP address for the network encoder
IPv4 Subnet Mask
Manual setting of the subnet mask for the network encoder
IPv4 Default Gateway
Setting of the default router for the network encoder.
IPv6 Mode
Manual: Manual configuration of IPv6 data.
DHCP: The IPv6 connection data is provided by the DHCP server.
Route Advertisement: The IPv6 connection data is provided by the DHCP server (router) in connection with
the ISP (Internet Service Provider).
IPv6 Address
Display of the IPv6 address. The address can be configured in the IPv6 "manual" mode.
IPv6 Subnet Mask
Display of the IPv6 subnet mask.
87