Hendi BLUE 205808 Mode D'emploi page 7

If after these controls, the malfunctioning continues, it is advisable to contact technical
1) Reset overload circuit breaker
- Allow the deep fryer to cool down.
- Remove the element holder from the support.
- Unscrew the black protective cap from the bottom of the element holder.
- Press the "reset button" of the overload circuit breaker. You should hear a clear click.
- Screw the black protective cap back on
- Reinstall the element holder on the support.
Warranty
Any defect affecting the functionality of the appliance that becomes apparent within one year after
purchase will be corrected by free repair or replacement provided the appliance has been used and
maintained in accordance with the instructions and has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is claimed under warranty, state where and when it
was bought and include proof of purchase (f.e. receipt).
In line with our policy of continuous product development we reserve the right to change the product,
packaging and documentation specifications without notice.
Discarding & Environment
At the end of the life of the appliance, please dispose of the appliance according to the regulations
and guidelines applicable at the time.
Throw packing materials like plastic and boxes in the appropriate containers.
In case of any doubt, always contact your supplier!
assistance.