Kratki PANTHER MERLOT Manuel D'utilisation Et D'installation page 61

Thermostat mode
Enabling and disabling the thermostat
Enabling:
Press the button. The display shows the icon
as the first and the a tual room temperature.
Disabling:
1. Pressthe button .
2. Pressthe buttonofthe
3. Pressthe button, to enter the Programmed mode.
Thermostat settings
1. Press and hold until you see the icon
flashe .
2. To set the desired temperature use the
3. T o confi m, press
Programmed mode
Enabling the programmed mode
Press the button. The display shows the
and „ON" and „OFF".
Disabling the programmed mode
1. Press the button or the
mode.
2. Press the button, to go to the Thermostat mode.
Information:
Entering the switch-on temperature of the thermostat will automatically set the
same value for the switch-on temperature of the programmed mode.
Default settings:
Temperature of switching on: 21°C
Temperature of switching ff: „--" (only the control flame
button.
. The temperature displayed
and
or wait.
button, or
and the preset temperature
buttons.
icon and the 1 or 2 symbols
the button to go to the manual
61