Kratki PANTHER MERLOT Manuel D'utilisation Et D'installation page 44

Figure 5. Coaxial system output method
Gas stove are designed for a specific ombustion air supply. The chimney system used to connect
the Freestanding STOVE PANTHER MERLOT series is based on elements consisting of two coaxial
conductors, wherein the outer diameter of 150 mm is responsible for providing air to the
combustion chamber and the internal diameter of 100 mm for the discharge of exhaust gases. The
concentric line must end with a special cap to allow proper operation of the system.
The coaxial cable should be terminated with a special thimble allowing for proper operation of the
system. All system components must have the required approvals and CE certific tes. Freestanding
gas stove PANTHER MERLOT Series has been tested using a coaxial - air combustion system. In the
event of con-densate in the air-flue pip , the fit er should apply a drainage element (droplet
eliminator).
44