Plusmed pM-KN01 Mode D'emploi page 30

The pM-KN01 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or
the user of the pM-KN01 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the pM-KN01 as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output
power
of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts
(W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Condition for transportation and storage
Environment temperature scale: -20˚C-45˚C
Comparative humidity scale: ≤95%
Air pressure scale: 500 –1060 hPa
Quality Warrant
The warranty period for the product is 2 years.
30
Separation distance according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
d = 1 1 7 . P
0.12
0.37
1.17
3.69
11.67
m
d = 1 1 7 . P
0.12
0.37
1.17
3.69
11.67
800 MHz to 2,5 GHz
d = 1 1 7 . P
0.07
0.22
0.70
2.21
7.00