Télécharger Imprimer la page

Aqua Medic Reef Station Mode D'emploi page 5

Masquer les pouces Voir aussi pour Reef Station:

Publicité

Les langues disponibles

Les langues disponibles

3. Circulation pump
See attached manual.
4. Protein skimmer
See attached manual.
5. Mounting the filter
The cabinet filter system Reef Station is being delivered ready to use in a glass tank. This tank can be placed in
the cabinet of a standard aquarium. As it is an open filter system, the cabinet should be of a waterproof
construction.
Water inlet to the aquarium: The piping from aquarium to the filter should be installed with PVC pipes of 40 mm
diameter.
The pressure piping for the pump is installed with PVC pipes of 32 mm diameter.
Water reservoir - water level in the filter tank
All open filter systems have to be planned in a way that in case of a circulation pump failure they can take up
water flowing back from the aquarium without creating an overflow. The volume of water is depending on the
construction of the overflow device, the pump capacity and aquarium surface. The water volume can be
calculated by taking the aquarium surface (length x width) and the build-up above the overflow level respect.
overflow comb. In most cases, the build-up is 2 cm.
During normal operation, the filter tank can only be filled to a height that this water volume is taken up in case
of emergency. The minimum water level is determined through the height of the pump suction opening. It has
to be made sure that the pump does not suck in any air. Otherwise, fine air bubbles are blown into the water
which create a lot of slurp noises. If the pump runs dry, it may get damaged irreversibly. The water which
evaporates within the aquarium is only missed in the filter chamber - in the aquarium itself, the water level will
be maintained. For this reason, the water level has to be controlled and replenished regularly. It is best to mark
minimum and maximum levels directly at the filter.
6. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period, we
will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 05/2019
5

Publicité

loading