Blatchford ElanIC Guide De L'utilisateur page 13

Charging Indicator LED (Right Hand Side)
Note: Always interpret the indications given by the
Charging Indicator LED and the Charger Pod LED
in connection with each other.
Note: : The charger will turn itself off after 6 hours of
operation. This will manifest itself by Solid light
on Charger Pod LED and no light on Charging
Indicator LED. This is normal and usually means
that the device charged correctly.
LED
No Light
Single flash
Single flash
+ LED stays off
Single flash repeated
Double flash repeated
Triple flash repeated
Rapid flashing
Solid Light
Charger Pod LED
LED
Slow pulsating
Solid
No light
Rapid pulsating
Indicating
Start Up
Charger connection failed
Primary Indications
Correct start up after
charger connected
Correct start up after
charger connected
Charging empty battery
Charging medium level
battery
Charging high level
battery
High temperature shut
down
End of Charging
Charging completed
Indicating
Normal Operation of
charger
Operational but no
charging
Not powered
Possible overheating
Charging
Indicator
LED
Try reconnect
See further indications
Battery full
Charging resumes after
Ready for use
Action
None
Check mating to charging
surface
Check mains connection
Charging may resume
after cooling down
13
Action
below
None
None
None
cooling
Charger
Pod LED
938439/2-0620