Specifications; Measuring Range - AMIX SPL 25 Manuel Utilisateur

SPECIFICATIONS

SPL25: Data Logging Sound Level Meter
 A weighting : Class 2 according to IEC61672-1 juin 2003
 C weighting : Class 2 according to IEC61672-1 juin 2003
CAP65: Active pressure transducer
 Frequency weighting A : Class 2 according to IEC61672-1 Juin 2003
 Frequency weighting Z: Class 2 according to IEC61672-1 Juin 2003
Power supply: 12 Volts, 400mA
Dimensions : 265 x 150 x 35 mm
Weight : 1,5 kg (SPL + Sensor)

MEASURING RANGE

 With A weighted, Leq level range is from 61 dB(A) to 123 dB(A).
However, it is possible, as an option, to measure from 41 dB(A) to 103dB(A).
 With C weighted,Leq level range is from 61 dB(A) to 123 dB(A), and peak level range is from 70
dB(C) to 132 dB(C).
However, it is possible, as an option, to measure from 50 dB(C) to 112 dB(C).
INFORMATIONS
Warning !!!
Never use this equipement without proper grounding.

Check quality of grounding.

Should noise or hum occurs when connected to other equipments, never disconnect

grounding, use insulating transformer on mains.
Never open the case without disconnecting mains

Avoid high temperature exposure.

Never expose the equipment to rain, snow or moisture.

SPL25 complies with :
EN60065, EN55013, EN55020, EN60555-2, and EN60555-3, according to 73/23/EEC, 89/336/EEC
and 93/68/EEC.
AMIX 43 SPL25