AMIX SPL 25 Manuel Utilisateur page 39

WEB INTERFACE
 Internal configuration
A password is required to access to this part of the server
From this menu one can set:
 The site.

 The accurate localisation on the site.

 Offset.

 Opto couplers 1 and 2 thresholds.

 Each opto coupler temporal weighting.

A or C weighting.

Offset value to adjust the sensor level, to match the
" audience " level.
AMIX
A or C weighting selection
(Factory password:1052
Give a name to the site ans his location.
These names will be used within the
"Leq Visualisation graph"
Measuring range :
Depending on the sensor, do not forget
to configure the sensor type used in
web pages from the server.
CAP65A, CAP40A and CAP90A :
In A weighted, measurement range is
61 dB (A) to 123 dB (A)
In C weighted,, the measuring range
is 61 dB (C) to 123 dB (C)
In peak, the measurement range is 70
dB (C) to 132 dB (C)
CAP65B, CAP40B and CAP90B :
In A weighted, measurement range is
41 dB (A) to 103 dB (A)
In C weighted,, the measuring range
is 41 dB (C) to 103 dB (C)
In peak, the measurement range is 50
dB (C) to 112 dB (C)
CAP90C :
In A weighted, measurement range is
31 dB (A) to 93 dB (A)
No possibility of functioning in C
weighted or in peak with the CAP90C.
39
Next
).
SPL25