Using The Unit; After Use; Technical Data - Clatronic TYG 3027 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Temerature adjustment
Range
in °C approx.
A
B
C-D
over 100°C
E-G
150° - 250 °
H
Please note: The stated temperatures are only reference
values.
The device has reached the correct temperature when the
control lamp on the thermostat (7) goes off. During operati-
on the control lamp goes on from time to time to show that
the correct temperature is being maintained.

Using the unit

Preheat the grill for approximately 5 minutes. When the
control lamp goes off the grill is ready for use.
The cooking time depends on the type and quantity of
food that is to be cooked as well as the degree of cooking.
Please base these times on your own experience.
When turning the food that is being cooked, please use
wooden or Tefl on utensils so as not to damage the non-stick
layer.
When cooking is fi nished the food may be kept warm by
turning the controls to 1.
Fat Collecting Pan (4)
Please note! The pan under the heating plate must be inserted.
This is where excess fat collects. When grilling you should check
the contents regularly and empty the pan when necessary.
Caution: The grill is hot during use!

After Use

To switch the device off, fi rst turn the temperature regulator to
0 (off) and remove the plug from the socket. Do not remove the
thermostat from the device until the device has cooled down, as
the temperature sensor is still very hot after use.
32
05-TYG 3027 32
Use
Keeping warm
up to 100°
Cooking
Simmering
Stir-frying
maximum
Grilling
Cleaning
Always pull out the plug from the mains socket before
cleaning and wait until the unit has cooled down.
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Under no circumstances should the device be immersed in
water for cleaning.
Heating Plate
Please remove any food residues while they are still warm
with a damp cloth or paper towel.
Clean the heating plate with a soft sponge and soapy water.
Then wipe off with clear water and dry thoroughly with a soft
cloth. After drying please apply a thin fi lm of edible oil to the
surface.
Fat Collecting Pan
Pull out of the fat collecting pan. Shake the contents out and
clean the drawer in soapy water.
Housing
Clean the housing after use with a slightly damp cloth.
Thermostat
Please clean the thermostat with a soft paper towel or a soft
try cloth.
Never clean the regulator with damp items, as otherwise this
might result in an electric shock or fi re.
Never immerse the cable loom in water!

Technical Data

Model: ........................................................................... TYG 3027
Power supply:............................................................230 V, 50 Hz
Power consumption:..........................................................2000 W
Protection class:........................................................................... Ι
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
22.03.2006, 9:53:55 Uhr

Publicité

Table des Matières
loading

Table des Matières