Cautions For Use; Maintenance; Troubleshooting - Num'axes EYENIMAL Training Pulse Guide D'utilisation

Cautions for use


- The receiver collar is totally waterproof. Your dog can swim in water. In order to maintain water
tightness, we recommend the replacement of the seal located in the receiver collar every year.
- The EYENIMAL Training Pulse remote control is shower proof only: it is only designed to remain a
short time in the rain. Put it in a dry place as soon as possible.
If your remote control falls into the water, it could be damaged in an irreversible way.
- The dog should not wear a medal, metallic collar, or any other kind of collar together with the training
collar.
- Avoid placing the remote control close to objects sensitive to magnetic fields, which could be irreversibly
damaged.
- Do not place or keep the unit in places exposed to high temperatures.
- It is necessary to replace the battery every two years, even if the unit has not been used for long periods.
- Never leave discharged batteries in the unit (remote control and collar): they could damage your
product.
- Remove the battery from the receiver collar and from the remote control if you are not using the
appliance for 3 months or more. The collar will memorize the configuration chosen (coding).
- Keep your EYENIMAL Training Pulse unit out of reach of children. It is not a toy for you or your children.

Maintenance


- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and
neutral detergent.
- In order to maintain water tightness, we recommend the replacement of the seal located in the receiver
collar every year.
- The strap can be washed with soapy water.

Troubleshooting


Should your product stop working or develop a fault, first read this user's guide over, then check the
batteries and replace them if necessary and retry. Also check that you are using the product correctly.
If you encounter any problem, re-code the receiver collar (ref. re-coding procedure).
Reinitialize the system as follows:
- Remove the collar battery from its housing
- With a metallic tool (e.g. screwdriver, scissors) touch each of the 2 battery contacts for approximately 2
seconds
Gb - 26