Burner Pump - elco P2.190 L/TEH Notice D'emploi

Operation

Burner pump

SUNTEC
AS V 47 A
Y1
4
3
P V
SUNTEC SUNTEC
1 2
SUNTEC
1
1
Single-tube system
SUNTEC
4
1
54
1 intake connection
2 return connection
3 pressure connection
4 oil manometer connection
5 low-pressure manometer
10
connection
5
6 light oil pressure adjustment
10 solenoid valve electrical connection
Y1 light oil solenoid valve
6
1 Hoses
2 Filter
3 Cut-off valve
2 3
5
2 3
06/2014 - Art. Nr. 4200 1057 7300
The pump used in the light oil burner is
a self-priming gear pump, which must
be connected to the double-pipe
system; insert the filter in the intake
tube. A suction filter and light oil
pressure regulator are incorporated into
the pump.
Prior to starting up the appliance,
connect the manometers for measuring
the pressure and depression.
NB: prior to starting the burner, check
that the return is open. An obstruction
may cause damages to the pump's
seal.
SINGLE-TUBE SYSTEM: In the event
of a single-tube supply circuit, the
pump must be modified according to
the instructions shown in the adjacent
diagrams.