EMAK Oleo-Mac OM 105J Manuel D'utilisation Et D'entretien page 45

(16) REVERSE TRAVEL PEDAL
The pedal controls the power going to the wheels and regulates the speed of the machine backwards.
Changing the travel direction forwards / reverse is only possible after stopping the machine!
(17) FORWARD TRAVEL PEDAL
The pedal controls the power going to the wheels and regulates the speed of the machine forward.
Changing the travel direction forwards / reverse is only possible after stopping the machine!
(18) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing, the lever must be set to position 7.
(19) MOWING DECK POSITION LOCK LEVER
The lever serves to lock the position of the mowing deck.
(20) GRASS CATCHER DUMP LEVER HANDLE
The lever serves to empty the grass catcher.
The more the pedal is pushed towards the floor, the faster the machine will be and vice versa.
When the pedal is released it will automatically return to the neutral position and the machine
will stop.
More information 5.5.
The more the pedal is pushed towards the floor, the faster the machine will be and vice versa.
When the pedal is released it will automatically return to the neutral position and the machine
will stop.
More information 5.5.
The lever has 7 work positions, which correspond to a mowing height of 3 to 9.5 cm.
The higher the number of the lever position, the higher vegetation height remains after
mowing.
The lever can be used for the first four mowing deck positions. First tilt out the lock lever
upwards, then set the mowing deck lever to the appropriate position and lock this position by
tilting the lock lever downwards.
More information 5.6.
45